Epoxy Flooring Contractor in Franklin, TN
Best Coast Epoxy Coatings installs garage, basement, patio and commercial floor coatings across Williamson County and the Nashville area. Founder-installed, moisture-tested before every quote, and priced in writing before anyone steps in your garage.
If you are looking for an epoxy flooring contractor in Franklin, TN, you have probably already noticed that most of the options are franchises dispatched from somewhere else, and most of them will not tell you what a floor costs until a salesperson is at your kitchen table. We do it differently. Best Coast Epoxy Coatings is based in Franklin, the founder is the lead installer, and the price ranges for every system we install are published on this site.
I am Ryan Pepple. I have installed epoxy and polyaspartic floors by hand for 15 years, first building this company solo in Southern California and now running it from Franklin with a local crew trained on the same process. Every slab we coat gets a moisture test, a diamond grind, a properly cured base coat, and a UV-stable polyaspartic topcoat. That is not a premium package. It is the only way we install a floor.
Get a Written Estimate Before the Site Visit
Send us your floor size and a couple of photos. We reply with a price range and a date for a free on-site moisture test. Call [TN PHONE] or use the form below.
Get a Free QuoteFloor Coating Services in Franklin and Middle Tennessee
Most of our work is residential garages, and most of those get a flake system: an epoxy base coat for bond strength, a full broadcast of vinyl flake, and a polyaspartic topcoat that shrugs off hot tires and August sun. The four residential systems we install, how each one is built, and what each costs by garage size are laid out on our garage floor coatings page.
When a floor needs to cure in hours instead of days, or when it lives outside under direct sun, we install full polyaspartic systems. Polyaspartic is not automatically better than epoxy, and the franchise marketing that says otherwise leaves out the trade-offs. Our polyaspartic floor coating page explains when it wins, when epoxy wins, and why we default to a two-day install.
For businesses, we install thin-mil epoxy, 100%-solids build coats, quartz broadcast for wet areas, flake polyaspartic for showrooms, and urethane mortar for kitchens and breweries, scheduled around your hours so you never close. Warehouse, service bay, restaurant and retail systems are compared on the commercial epoxy flooring page.
Basements, covered patios, porches and pool decks round out the list. Basements get a relative-humidity test as a matter of course because Middle Tennessee slabs hold moisture; exterior floors get a full polyaspartic system with an anti-slip additive because an epoxy topcoat would yellow within a season.
What a Floor Coating Costs Here
Every other coating company in the Nashville market makes you request a quote to learn a number. These are the installed ranges Franklin homeowners are paying in 2026, including diamond grinding, standard crack repair and a polyaspartic topcoat. Final pricing follows a moisture test and slab inspection, and every line item is itemized on the estimate.
| System | Per sq ft | 2-car garage (400–500 sq ft) |
|---|---|---|
| Solid-color epoxy with polyaspartic topcoat | $4–$7 | $1,800–$3,200 |
| Flake epoxy with polyaspartic topcoat | $5–$8 | $2,300–$3,800 |
| Full-flake polyaspartic | $6–$9 | $2,500–$4,500 |
| Metallic epoxy | $8–$15 | $3,600–$7,500 |
| Commercial systems | $3–$15 | Quoted per project |
Middle Tennessee installed estimates. Vapor-barrier primer, heavy repair, stem walls and anti-slip additive are priced separately and disclosed up front.
A complete cost breakdown by garage size, the add-ons that move a quote, and what does not cost extra are all covered on our Franklin epoxy flooring guide.
Why Coated Floors Fail in Williamson County
The peeling, yellowed garage floors you see around Westhaven and Ladd Park did not fail because epoxy is a bad product. They failed because someone skipped a step. Franklin sits on clay soils over limestone that push moisture vapor up through the slab, the region averages around 70% humidity, and the concrete goes through 67 freezing days and 49 days above 90°F every year. A coating applied over an untested slab, an acid-etched surface, or a thin one-day film does not survive that.
The full explanation of moisture vapor, hot-tire pickup and why we grind instead of etch is in the Franklin floor failure guide, and it is worth ten minutes before you compare quotes.
Where We Work
Our shop and crew are in Franklin. Travel is included throughout Williamson County and the immediate Nashville area; further out we disclose a small mobilization fee on the estimate.
Franklin, Cool Springs, Westhaven, Ladd Park, Berry Farms and Fieldstone Farms
Brentwood and Nolensville
Spring Hill and Thompson’s Station
College Grove, Arrington and Fairview
Nashville, including Green Hills, Belle Meade, Oak Hill and Bellevue
Murfreesboro and Columbia
Licensed, Insured and Local
Tennessee does not require a contractor’s license for a residential floor coating under $25,000 in Williamson County, which is why so many trucks with a grinder and a business card are working here. We operate as a licensed and insured business, carry general liability and workers’ compensation on every job, and send certificates of insurance before we set foot in your garage. Every floor comes with a written warranty; ask for the terms and we will walk through what is covered, including moisture-related delamination and hot-tire pickup, before you sign.
About Ryan Pepple
Ryan founded Best Coast Epoxy Coatings and has installed epoxy and polyaspartic floors by hand for 15 years. He built the company solo in Southern California, grinding, coating and warrantying every floor himself, then relocated the business to Franklin, Tennessee and built a local crew trained on the same two-day process. He personally inspects and moisture-tests every slab before it is quoted.
Contact: [TN PHONE] or [TN EMAIL]. Shop: [TN ADDRESS], Franklin, TN.
Start With a Number, Not a Sales Visit
Tell us the floor, the size and where you are in Middle Tennessee. You will get a written estimate range from Ryan, then a free moisture test on site. Garage details and system options are on the residential coatings page if you want to choose before you call.